Adding GIFs, TikTok, Tweets, Twitch, and Instagram to your posts.

[jboldeniv]

I finally figured out how to add Tweets, GIFs, Twitch, and Instagram posts on this board. The only thing that you have to do, is go to Advanced Options, then go to the little rectangular box that
says HTML Off. Change it to HTML On - Convert Linebreaks.

You can then go to the website that has the GIF, Tweet, or Instagram post that you are looking, and then click on the embed option. Copy it, then go back to the post you was writing. Then simply paste the code in your post.

It should work. For a long time, I didn't know how to do this. It's very easy. Anyway, I hope this helps.

[jboldeniv]

To embed Twitter posts, click on the tab where you see a list of icons, then click on the Twitter one. Click on embed on the Twitter post, copy the link, and then paste the link between the Twitter tags. The same thing for Instagram. Click on the Instagram icon, then copy the Instagram link, and paste it in-between the Instagram tags.

[jboldeniv]

I finally figured out how to add Tweets, GIFs, and Instagram posts on this board. The only that you have to do, is go Advanced Options, then go to the little rectangular box that
says HTML Off. Change it to HTML On - Convert Linebreaks.

You can then go to the website that has the GIF, Tweet, or Instagram post that you are looking, and then click on the embed option. Copy it, then go back to the post you was writing. Then simply paste the code in your post.

It should work. For a long time, I didn't know how to do this. It's very easy. Anyway, I hope this helps.

I've been trying to add Instagram posts on here. However, the embed is too long. It must be a way for me to do it.

[jboldeniv]

I finally figured out how to add Tweets, GIFs, and Instagram posts on this board. The only thing that you have to do, is go to Advanced Options, then go to the little rectangular box that
says HTML Off. Change it to HTML On - Convert Linebreaks.

You can then go to the website that has the GIF, Tweet, or Instagram post that you are looking, and then click on the embed option. Copy it, then go back to the post you was writing. Then simply paste the code in your post.

It should work. For a long time, I didn't know how to do this. It's very easy. Anyway, I hope this helps.

Also, when grabbing GIFs from tenor.com , or other places, to reduce the size of the GIF to a smaller size, look at the code for the GIF and look where it says width. Change the width from 100% to 30%.

[jboldeniv]

I finally figured out how to add Tweets, GIFs, and Instagram posts on this board. The only thing that you have to do, is go to Advanced Options, then go to the little rectangular box that
says HTML Off. Change it to HTML On - Convert Linebreaks.

You can then go to the website that has the GIF, Tweet, or Instagram post that you are looking, and then click on the embed option. Copy it, then go back to the post you was writing. Then simply paste the code in your post.

It should work. For a long time, I didn't know how to do this. It's very easy. Anyway, I hope this helps.

I also wanted to add that tweets are kind of funny. Sometimes, they don't always show up. You have to remove some of the code in them when embedding sometimes to get them to show.

[jboldeniv]

I also wanted to add that tweets are kind of funny. Sometimes, they don't always show up. You have to remove some of the code in them when embedding sometimes to get them to show.

If the tweet doesn't show up, then get rid of some of the text inside the tweet; to where you leave all of the <a href=""></a> alone. Delete some of the code until the tweet shows up in the post.

[jasondreamweaver]

It used to work but I dunno what's wrong

[jboldeniv]

It used to work but I dunno what's wrong

What's going on? I must admit, sometimes tweets don't always go through. When they don't work, you have to get rid of some of the code between the <a href=""></a> tags.

[jboldeniv]

What's going on? I must admit, sometimes tweets don't always go through. When they don't work, you have to get rid of some of the code between the <a href=""></a> tags.

Also, the only thing that you have to do is click embed on the tweet, GIF, or instagram post and then select HTML On - Convert, or Don't Convert Linebreaks.

[jboldeniv]

Also, the only thing that you have to do is click embed on the tweet, GIF, or instagram post and then select HTML On - Convert, or Don't Convert Linebreaks.

Use HTML On - Don't Convert Linebreaks.

[jboldeniv]

I finally figured out how to add Tweets, GIFs, and Instagram posts on this board. The only thing that you have to do, is go to Advanced Options, then go to the little rectangular box that
says HTML Off. Change it to HTML On - Convert Linebreaks.

You can then go to the website that has the GIF, Tweet, or Instagram post that you are looking, and then click on the embed option. Copy it, then go back to the post you was writing. Then simply paste the code in your post.

It should work. For a long time, I didn't know how to do this. It's very easy. Anyway, I hope this helps.

To add TikTok,

get the TikTok Video ID, click the Copy Link in the TikTok post, The copied link has this format:

https://www.tiktok.com/@user/video/<VideoID>

Copy just the Video ID part. The Video ID consists a bunch of some pattern of digits.

[jboldeniv]

I finally figured out how to add Tweets, GIFs, and Instagram posts on this board. The only thing that you have to do, is go to Advanced Options, then go to the little rectangular box that
says HTML Off. Change it to HTML On - Convert Linebreaks.

You can then go to the website that has the GIF, Tweet, or Instagram post that you are looking, and then click on the embed option. Copy it, then go back to the post you was writing. Then simply paste the code in your post.

It should work. For a long time, I didn't know how to do this. It's very easy. Anyway, I hope this helps.

I wanted to say that you don't have to turn on HTML On- Convert Linebreaks/Don't Convert Linebreaks anymore to add TikTok, Tweets, GIFs, or Instagram to your posts. The buttons are now in the editor. You have a button for TikTok, Twitter, and Instagram, and you also have a GIF button to where you can choose GIFS, the multi-colored button in the right-hand corner beside the smiley are all GIFs you can choose straight from GIPHY. It should now be easy to add GIFs, Tweets, TikTok, or Instagram to your posts.

[jboldeniv]

Yes!! It all works just fine. Now anybody can add GIFs, Tweets, TikTok, or Instagram to their posts with ease.

[jboldeniv]

For Soundcloud, you have to get the number part and put in-between the tags to embed the song.

For twitch, you can embed a single video, a channel, or a clip by getting the number for a video, the channel for a channel video, and add all the characters after the "/clip/".

[jboldeniv]

For Soundcloud, and Twitch, you have to get the number part and put in-between the tags to embed the song or video.

You can also use Video ID, Channel/Username, or Clip ID inside the Twitch BBCode tag.

To add clips, you need to add all characters after "/clip/" in the Clip URL and before "?" if it exists. For example, if the Twitch Clip URL is https://www.twitch.tv/myusername/cli...Qu2NyjJ1pbfKGa, the BBCode tag would look like this:

[twitchexample]MyClip-UlQu2NyjJ1pbfKGa[/twitchexample]

To embed Twitch videos into your posts, When you are on a twitch video, click on embed, and get the name of the channel, number, or clip in-between the quotations.

Then, click on the twitch button on the forum, and put the name of the channel, the number, if it's a number, or the clip in between the twitch tags.

[twitchexample]MyClip-UlQu2NyjJ1pbfKGa[/twitchexample]

[jboldeniv]

To embed Twitter posts, click on the tab where you see a list of icons, then click on the Twitter one. Click on embed on the Twitter post, copy the link, and then paste the link between the Twitter tags. The same thing for Instagram. Click on the Instagram icon, then copy the Instagram link, and paste it in-between the Instagram tags.